REV'IT! Lava H2O Women's Gloves

REV'IT! Lava H2O Women's Gloves

The REV'IT! Lava H2O Women's Gloves provide the essential features for riding in cold weather. 600D Polyester on the palm provides abrasion resistance while still being able to feel the controls. A special water resistant treatment keeps the leather looking good despite riding through the occasional shower. Two way stretch fabric hugs your hands while still offering superb breathability. Hard knuckle protection and foam palm sliders protect against impacts.

Protection Features:

• Outer Shell: 600D Polyester, flock PU, PU coated fabric, PWR|shell twill stretch
• Protection: Temperfoam Self-contouring foam that is not CE approved but still holds impact resistant properties, this product is used in areas where mobility is a must. thumb knuckle, PWR|shield PWR | shield was developed by REV'IT R&D to provide unsurpassed cut, tear and abrasion resistance. It is created via a unique knitting technique which combines polyethylene/polyamide and aramid fiber In woven form, aramid is an organic fiber known for excellent mechanical properties, including high tenacity, low density and low conductivity of heat. Mixed with resin and hardened, high impact resistance is yet another characteristic of this fiber. For the two-wheeled folk out there, Aramid is a friend. The fiber - as a cloth - adds abrasion-resistant to riding gear and adds rigidity when incorporated in the shell of helmets. DuPont™ Kevlar® Aramidic fiber with elevated resistance to tear, wear, shear and heat complemented by low electrical conductivity and high resistance to chemical corrosion. This excellent mechanical performance is matched by the lightweight and softness of the thread that guarantees comfort and a perfect fit at the same time. is a trademarked brand name of (generic) aramid. s resulting in a fabric with amazing abrasion resistance. When layered with Cordura denim, as found on many REV'IT! jeans, the protective qualities rival that of leather. at Palm, Temperfoam palm slider, TPU Thermoplastic polyurethane (TPU) is usually used in hard palm sliders. Its highly abrasion resistant properties allow the glove to slide along the asphalt, reducing the risk of injury. hard-shell knuckle
• Insulation: 3M Thinsulate Thinsulate® is a synthetic fiber used for thermal insulation in clothing. Thinsulate® fibers are about 15 micrometers in diameter, which is thinner than the polyester fibers normally used in insulation for clothing such as gloves or winter jackets. Thinsulate® insulation is soft and compressible. , fleece
• Waterproof & Breathability: hydratex A waterproof layer is laminated onto a carrier to construct the REV’IT! Hydratex® membrane. The carrier in turn protects the membrane against rub and tear damage. The seams of the membrane are taped to ensure waterproofing. The REV’IT! Hydratex® membrane is used in garments that demand a high level of all-weather protection. |Z-liner with McFit technology
• Certification: CE certified to EN 13594:2015 Level 1 Knuckle Protection

Ergonomic Features:

• Fit: tour fit
• Features: Elastic at wrist, short cuff, connect finger tip